鋁箔,Aluminum Foil

1)Aluminum Foil鋁箔

1.Experimental Research And General Evaluation Of New Type Slap-Up Stock Oil's Properties During Aluminum Foil Rolling;新型高檔鋁箔軋制基礎油性能的綜合評定與試驗研究

2.Sample Preparation And Analysis Of Aluminum Foil By Spark Source Atomic Emission Spectrometry;鋁箔樣品的制備與火花源原子發射光譜分析

3.Study On High Specific Capacitance Of Aluminum Foil By Multi-Arc Ion Plating System;多弧離子鍍制備高比電容鋁箔的研究

英文短句/例句

1.Poly-Cello Laminated Paper Or Foil For Flexible Package.保麗紙及袋、鋁箔袋

2.Aluminium Foil For General PurposeGB3198-1996工業用純鋁箔

3.Note: The Hydrophilic Coating Base Material Is Executed By The Aluminium Foil Used For Air Conditions.說明：親水涂層鋁箔的基材按空調器用鋁箔執行。

4.The Optifoil Concept-A Foil Minimill;最優化鋁箔廠──建設新鋁箔廠的最佳選擇

5.Aluminium Foil :Aluminium Sheet Or Coil Rolled To A Thickness Of Less Than 0.15mm.鋁箔：軸壓至小于0.15毫米厚的鋁片或鋁卷。

6.Packing: Vacuum-Packed With Aluminum Foil. 1kg Per Package.包裝：鋁箔真空包裝，1公斤/袋。

7.Wrapping Aluminium Foil Round A Joint Allows The Meat To Cook In Its Own Juice/Juices.用鋁箔把肉包住使之在原汁中烹制.

8.Aluminium Foil For Power CapacitorsGB/T3616-1991電力電容器用鋁箔

9.Aluminium Foil For Electrolytic CapacitorGB/T3615-1983電解電容器用鋁箔

10.Measuring Thickness Of The Aluminium Foil--Weighing MethodGB/T6608-1986鋁箔厚度的測定稱量法

11.Repeat Process To Make The Second Packet.按照以上方法重復制作另一個鋁箔卷。

12.Manufacturing The High Temperature Resistance Of Print Ink耐高溫藥用鋁箔包裝印刷油墨的開發

13.Study On Microstructures And Mechanical Property Of Al0.2Mn0.3Fe Wing-Foil;Al0.2Mn0.3Fe翅片鋁箔的組織和性能研究

14.Investigations On The Technical Processes And Cube Texture In Anode Aluminum Foil;陽極鋁箔工藝過程和立方織構的研究

15.Preparation And Research Of New Nano-Sized Hydrophilic Aluminium Foil Materials;新型納米親水鋁箔涂覆材料制備研究

16.Investigation On The Microstructure Of Sheets Of Hot Roll Aluminium Foils And Cast-Rolling Aluminium Foils For 1235;1235鑄軋和熱軋鋁箔毛料組織研究

17.Study On Etching Process Of Area-Enlarging Of Aluminium Foil For Electrolytic Capacitor;電解電容器用鋁箔擴面腐蝕工藝研究

18.The Determination Of Sulfate In Etching Baths Of Alumimium Foil By Ion Chromatography;離子色譜法測定鋁箔腐蝕液中硫酸根

相關短句/例句

Aluminium Foil鋁箔

1.Analysis Of Pinhole Defect Formation Mechanism In Aluminium Foil;一種鋁箔針孔形成機理的探討

2.Effect Of Particle Dimension In Aluminium Foil Rolling Oil On Pinhole Formation;鋁箔軋制油中粒子尺寸對針孔形成的影響

3)Al Foil鋁箔

1.Growth Control Of Transverse Tunnels For Al Foil In Electrolytic Capacitor;電解電容器鋁箔橫向隧道孔的生長控制

2.ELECTRONIC COMPONENTS & MATERIALS (China), Vol 18, No 6, P 14 15 (Dec 1999) In Chinese Al Foil For Low Voltage Electrolytic Capacitor Is Etched By AC Current In Hot Hydrochloric And Sulfuric Acid.研究了ＨＣｌ中５０ Ｈｚ交流電侵蝕下，電解槽電極布置對電解電容器用高純鋁箔的侵蝕均勻性的影響。

3.The Relationship Between The Strain Rate And The Thickness(T)Is Investigated Via Creep Test Of Thin Al Foils With The Thickness Of 10～200 Μm Under Constant Applied Stress At 200 ℃.通過在200℃恒載荷的高溫變形實驗,對厚度(T)為10～200μm的鋁箔的應變速率與厚度的變化規律進行了研究。

4)Aluminum[英][??lu?m?n?m; ??lu?m?n?m][美][??lu?m?n?m; ??lu?m?n?m]鋁箔

1.The Technology Of Aluminum Electrolytic Capacitor Anodic Foil Was Studied To Add The Aluminum Areaand Gain High Capacitance .研究了直流電腐蝕對電解電容器陽極鋁箔比容的影響。

2.The Technology Of Aluminum Electrolytic Capacitor Anodic Foil Was Studied To Add The Aluminum Area And Gain High Capacitance.研究了直流電侵蝕對電解電容器陽極鋁箔的擴面侵蝕形態和比容的影響 ,鋁箔雜質、腐蝕液組份、直流電電流密度的影響。

3.Reflective Thermal Screen With Aluminum Is Popular Now Among Them,Because Of Outstanding Effect In Energy Saving And Of That It Can Be Used Conveniently.內保溫幕是溫室供熱系統運行時的重要節能措施 ,其中鋁箔反射型內保溫幕由于其使用優點和節能效果得到了廣泛的應用。

5)High-Purity Aluminium Foils高鋁鋁箔

6)Beaten Alumin(I)Um鋁板;鋁箔

延伸閱讀

鋁箔分子式：CAS號：性質：厚度不超過0.2mm的鋁或鋁合金箔片。特點是表面光潔平整、重量輕、遮光性好、不易腐蝕、無毒、易加工，但抗撕裂強度低，易卷曲，不耐堿，易被強酸侵蝕。鋁箔可與紙、塑料復合，制成復合軟包裝材料，可以經受高溫殺菌。用作冷凍水果、肉類、糖果、糕點、巧克力、咖啡、奶油、乳酪等的包裝材料。